My Account My Account

Burst - Aluminium

Burst - Aluminium

 
£361.10
+

The panels are made of either weathering steel, which is available pre-weathered or in a natural "raw" finish, or in powder coated aluminium. The panel designs are laser-cut and de-burred for consistency, precision and safety. They are affixed by steel clamps to aluminium posts, which themselves are set in concrete, just like traditional fence posts. Aluminium's resistance to corrosion, and the inherent strength of their box-section construction means that these posts will stand the test of time.

Good for screening walls, and can be back lit. Works well as a divider, giving structure to spaces.

DIMENSIONS:

Width: 1190mm
Height: 1780mm
Thickness: 3mm

REQUIREMENTS:

FITTINGS REQUIRED FOR FULL-HEIGHT PANELS: First (or stand-alone) panel will require: 2 x Posts, 6 x Clamps, 2 x End Caps. Each subsequent panel will require: 1 x Post, 6 x Clamps, 1 x End Cap

FITTINGS REQUIRED FOR BALUSTRADE PANELS: First (or stand-alone) panel will require: 2 x Posts (cut down to form 2 x 1.6m posts if concreting-in), 4 x Clamps, 2 x End Caps, 2 x Terrace Foot (if surface-mounted). Each subsequent panel will require: 1 x cut-down 1.6m post, 4 x Clamps, 1 x End Cap. If surface-mounting to a deck or terrace, each post will need to be cut down to 1.1m and will require 1 x Terrace Foot per post.

RAL COLOURS: The standard range aluminium panels are powder-coated in RAL 8019 (Grey/Brown) and the RHS Parterre range aluminium panels are powder-coated in RAL 7006 (Beige/Grey). All fittings: Posts, End Caps, Clamps and Terrace Foot are powder-coated in RAL 7021 (Black/Grey), which complements the warmer tones of both the standard and RHS Parterre range aluminium panels.

Click here to view the installation guide.