Natural Aluminium RITE-L-EDGE: H100mm x D70mm - 2.4 metres
(10 per pack / 24m per pack)
- free delivery
RITE EDGE is manufactured using a high-grade aluminium alloy so no painting, staining, rusting or replacing to worry about as the product is designed to last at least 30 years. The aluminium edge restraint is 'L' shaped for additional strength and provides an unobtrusive edging solution for hard landscape surfaces. The base of the section incorporates fixing holes to enable the section to be secured to an appropriate sub base. Within the vertical section is a slot along the length of the edging to accommodate the supplied joining piece. This joining system ensures each length joins to the next simply and accurately. The regular spacing of cut-away 'V' shaped slots enables flexibility to create any shape or design. Rite-L-Edge uses Aluminium Allo 6005A T6 and due to its high heat resistance to heat, makes it suitable foir use with hot asphalt surface finishing up to 180 degrees celsius.
|Material||Aluminium 6005A T6|
|Profile Width (Foot)||70mm|
|Pieces per pack||10|
|Linear Metres per pack||24m|
|Fixing method||Steel Pins* (sold separately)|
|Joining Method||Connector Strip (included)|
* C541 Spiral Steel Fixing Pins (Galvanised) 25cm long are recommended to secure the Rite-L-Edge to the prepared sub-base. The number of fixing pins required per linear metre is dependent on the application. Our recommendation is that for installations subject to frequent vehicular traffic then the pins should be 10cm apart, occasional vehicular traffic - 20cm apart, pedestran traffic - 30cm apart.